EnOcean CO2 Sensor Temperature and Humidity

CO2 Temperature and Humidity

The Pressac Sensing wireless CO2 Sensor is designed to measure and report levels of Carbon Dioxide, ambient temperature and relative humidity in an internal environment. During normal operation, the sensor is powered from ambient room light: in prolonged low light environments the security of battery back-up ensures up to 10* years of continued maintenance free operation. The sensor supports the open EnOcean® standard (ISO/IEC 14543-3-10), facilitating seamless connection with building management systems.

  • Energy harvesting – powered by ambient light from the surrounding environment
  • Maintenance-free – for cost efficiency
  • No wiring required – low cost of installation
  • No wiring required – low cost of installation and optimal positioning

Report CO2 Levels
Carbon Dioxide

Real time monitoring of concentration levels

Measure Temperature
Temperature

Measure and report levels of ambient temperature

Humidity monitoring
Relative Humidity

Measure and report relative humidity

Wireless
EnOcean compliant

Wide compatibility with other EnOcean® products.

CO2, Temperature and Humidity Sensor Technical Data
Measurement Range CO2 0 to 2550 PPM
Temperature 0ºC to +51ºC
Humidity 0 to 100% RH
Accuracy CO2 +/- 125PPM
Temperature +/- 0.5ºC
Humidity +/- 5% RH
Sampling Rate Can be fixed to 15 minutes or can dynamically adjust between 5 and 15 minutes dependent on power source and light conditions
Repeater No
Telegram 4BS
Environment IP2X
Battery Back Up 3.6v A size non rechargeable Lithium
Typical life expectancy of the battery up to 10 years.
Enclosure Material ABS
Calibration Manual or auto recalibrates every 8 days
Solar Amorphous Silicon Solar Cells
Operating Temperature -5ºC to +60ºC
Storage Temperature -20ºC to +55ºC
Sensor response time Telegram transmission is within 2 seconds of measurement
Dimensions 115mm x 80mm x 35mm approx.
EEP A5-09-04