Wireless current monitoring sensors

Measure energy consumption at a circuit, zone or equipment level

Our wireless current sensors (CT) simply clip around a cable and measure the alternating current (AC). The small, energy-harvesting devices use ultra-low power wireless and battery-less technology making them easy to install and very low maintenance. They can easily be fitted inside a machinery panel, distribution panel or other suitable location.

solution_icon4

Get accurate, reliable current measurements

Wireless CT sensors measure electrical current (50Hz or 60Hz) and report an average every 30 seconds

solution_icon6

Wireless and self-powered for easy install

The sensors simply clip around a cable and self-power by drawing an ultra-low charge from the measured conductor, so there’s no need for batteries or wiring.

solution_icon13

Access near real-time data locally or in the cloud

Energy consumption data can be sent securely to a local network or the cloud — via Ethernet, LTE (4G) or WiFi — using Pressac’s smart gateway.

Technical Specification

Features
  • Clamps simply clip around cables with no interruption to electrical supply. The wireless transmitter attaches outside the panel for reliable wireless data transmission
  • Sensors measure AC current (50Hz or 60Hz). Reports average current every 30 seconds
  • Single-channel (single-phase) clamps measure the electrical current flowing in a single cable, while three-channel (3-phase) clamps measure current in 3 individual cables. Normally you will find single-phase systems in, for instance, households and office buildings. In the industry and for heavier machines, three-phase electric power is typically used
 Range
  • One channel measurement ranges:
    1A–60A (accuracy +/- 0.1A or 2%, whichever is greater)
    2A–200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
  • Three channels measurement ranges:
    1A–60A (accuracy +/- 0.1A or 2%, whichever is greater)
    2A–200A (accuracy +/- 0.1A or 2.5%, whichever is greater)
    2A-600A (accuracy +/- 1A or 3%, whichever is greater)
Wireless communication
  • EnOcean internationally approved, licence-free ISM bands:
    868 MHz for Europe (RED)
    902 MHz for North America (FCC) and Canada (IC)
    928 MHz for Japan (ARIB specification)
  • EnOcean Equipment Profile (EEP): D2-32-00, D2-32-02
Power
  • Self-powered using ultra-low energy from the measured conductor, so there’s no need for batteries or wiring
A ribbon with Pressac Communications certifications and credentials

Want to buy CT clamps for your smart project?

Contact our friendly team to enquire about your sensor needs.

Wireless smart sensor and connected technology

wireless-sensor-technology

Quick to install and set up

low-power-sensor-technology

Ultra-low power, energy-harvesting

secure-sensor-technology

Secure licence-free transmission

interoperable-sensor-technology

Interoperable and scalable

quality-sensor-technology

Highest quality and compliance

Easily access and integrate current sensor data

Our technology is system agnostic, the data from our sensors can be used in any way you need. There are different options to choose from, making it easy to get your data in the way that’s right for you.

google-sheets-icon

Access your sensor data in a spreadsheet

node-red-icon

Visualise sensor data using Node-RED

integration-icon

Integrate live data into any software or IoT platform

bms-icon

Feed sensor data into existing building management systems

direct-icons

Connect sensors directly to EnOcean controllers

A thumbnail of the Pressac Technology Catalogue

Want to learn more?

Download our product brochure to learn more about our smart-building sensor technology.