Three Channel CT Clamp V3

Three Channel CT Clamp V3

The Pressac Sensing version 3 Wireless 3 Channel CT Clamp is designed to measure and report the AC current flowing in 3 separate channels. Powered from any of the measured conductors, the measured current in all 3 channel is reported every 30 seconds. The Pressac Sensing version 3 Wireless 3 Channel CT Clamp is easily installed with no disturbance to the measured conductors.

  • Energy harvesting – powered from the measured cable
  • Pluggable - for ease of installation
  • Rapid and de-skilled installation – straightforward and easy set-up with no disruption
  • No batteries to replace – no maintenance costs

Appliance fingerprinting
Appliance Fingerprinting

Calculate the operational costs of each appliance

No batteries
No Batteries

Requires no batteries or wiring

Measure current
Measure Current

Transmits electrical current value (Amperes) wirelessly

EnOcean compliant

Wide compatibility with other EnOcean® products.

Three Channel CT Clamp V3 Technical Data
Measurement Range 1A - 60A ; 2A - 200A ; 2A - 600A
Measurement Frequency 50Hz or 60Hz
Accuracy - whichever is greater 60A = +/- 0.1A or 2%
200A = +/- 0.1A or 2.5%
600A = +/- 0.1A or 3%
Transmission Rate 30 Seconds
Reported Value 3 Separate channels in Amps
Repeater No
Environment IP4X
Enclosure Material Nylon 66
Sample Time Average of 5 measurements per 30 seconds (Per channel)
Telegram VLD
Calibration Not Required
Operating Temperature
& Humidity range
-5°C to +40°C; 85% RH
Storage Temperature & Humidity Range -20°C to +55°C; 85% RH
Diameter of Measureable Conductor 60A - 10mm or less
200A - 24mm or less
600A - 36mm or less
Dimensions of Clamp 60A - 25mm x 22mm x 35mm approx
200A - 35mm x 45mm x 65mm approx
600A - 65mm x 41mm x 85mm approx
Dimensions of Case approx 80mm x 55mm x 20mm approx
EEP D2-32-02