2 Phase Current Transducer

Dual Phase Wireless CT Clamp

The Pressac Wireless 2 Phase CT Clamp is designed to measure and report the AC current flowing in 2 separate phases. Powered from any of the measured conductors, the measured current in both Phases is reported every 30 seconds. Capable of measuring currents up to a maximum of 60A (50Hz or 60Hz), per phase the Pressac Wireless 2 Phase CT Clamp is easily installed with no disturbance to the measured conductors.

  • Energy harvesting – powered from the measured cable
  • No batteries to replace – no maintenance costs
  • Rapid and de-skilled installation – straightforward and easy set-up with no disruption
  • Transmits combined wattage (W) of both phases wirelessly using EnOcean® technology

Appliance fingerprinting
Appliance Fingerprinting

Calculate the operational costs of each appliance

No batteries
No Batteries

Requires no batteries or wiring

Measure current
Measure Current

Transmits electrical current value (Amperes) wirelessly

EnOcean compliant

Wide compatibility with other EnOcean® products.

2 Phase Wireless CT Clamp Technical Data
Measurement Range 1A to 60A
Measurement Frequency 50 or 60Hz
Accuracy +/- 1% FSD
Transmission Rate 30 Seconds
Reported Value 2 Seperate channels in Amps
Repeater No
Environment Indoor
Enclosure Material Nylon 66
Sample Time Instantaneous
Telegram VLD
Calibration Not Required
Operating Temperature & Humidity range -5ºC to +40ºC; 85% RH
Storage Temperature & Humidity range -20ºC to +55ºC; 85% RH
Diameter of Measurable Conductor 10mm or less
Dimensions of Clamps 25mm x 22mm x 35mm approx
Dimensions of Case 42mm x 62mm x 16mm approx
EEP D2-32-01

Call Pressac.
Call Pressac.

Our team are on hand to answer any sales related questions.

+44 (0) 115 936 5200
Call technical.
Call technical.

Talk to one of our knowledgeable technical team members.

+44 (0) 115 936 5202