Learn Mode

Learning in new devices


  1. Push & hold LEARN button on the Intelligent Relay After 3-4 seconds (LEARN LED Flashes) (release button)


  1. Activate transmitting device if applicable Press button used by device to learn ONCE within 30 seconds Pressing same device button again will UNLEARN


  1. Intelligent Relay LEARN LED flashes GREEN When a sensor has been learnt (30 second timer is restarted) Appliance / Light will turn ON then OFF


  1. Learn mode will automatically quit after 30 seconds Or short press LEARN to quit sooner The LED will flutter when leaving Learn Mode


Unlearn Mode

Deleting previously learnt Switch’s and contacts.


  1. Push & hold LEARN button on the Intelligent Relay After 3-4 seconds (LEARN LED Flashes) (release button)


  1. Press button used by device to learn ONCE within 30 seconds


  1. Intelligent Relay LEARN LED flashes GREEN Appliance / Light will turn ON/OFF


  1. Learn mode will automatically quit after 30 seconds or short press LEARN to quit sooner the LED will flutter when leaving Learn Mode