EnOcean Thermally Powered Temperature Sensor

Thermally Powered
Temperature Sensor

The Pressac Sensing Thermally Powered Temperature Sensor is designed to measure the temperature of a metallic ferrous surface to give early warning of a possible overheating or failure.

In normal operation, two temperature measurements are made. One measurement of the ambient air temperature, and one measurement of the attached ‘metal’ surface. Periodic readings, powered by a small battery are made every four hours. When the ‘measured’ surface becomes warm, more frequent measurements and telegrams are made powered by the on board Peltier device. Initiation of this frequent reporting and subsequent device powering comes from a differential in temperature of the ambient and measured surface temperature.

  • Easy, de-skilled installation (attached with magnets)
  • Prolonged battery life by energy harvesting from the warm surface when in use
  • EnOcean® Compliant

easy installation magnetic
De-Skilled Installation

Attaches using adjustable magnets

Measure Temperature

Measure surface and ambient temperature

Energy Harvesting Heat
Energy Harvesting

From the warm surface when in use

EnOcean compliant

Wide compatibility with other EnOcean® products.

Thermally Powered Temperature Sensor Technical Data
Measurement Range -5ºC to 100ºC
Accuracy +/- 2ºC nominal at 30ºC
Transmission Rate Dynamically adjusted between 4 hours & 1 minute dependent on surface temperature
Repeater No
Telegram MSC
Environment IP3X
Enclosure Material Nylon 66
Calibration Not Required
Operating Temperature Range 5ºC to +100ºC (On measured surface)
Storage Temperature Range -20ºC to +55ºC 80% RH
Dimensions Approx 82mm x 38mm x 30mm
EEP MSC D1-03-C0

Call Pressac.
Call Pressac.

Our team are on hand to answer any sales related questions.

+44 (0) 115 936 5200
Call technical.
Call technical.

Talk to one of our knowledgeable technical team members.

+44 (0) 115 936 5202