Single Channel CT Clamp V3

Single Channel CT Clamp V3

The Pressac Sensing version 3 1 Channel CT Clamp is designed to measure and report the AC current flowing in a single channel. Powered from the measured conductor, the measured current in the channel is reported every 30 seconds using the industry standard, wireless EnOcean® protocol. With a maximum measurable current of 60A the Pressac Sensing version 3 1 Channel CT Clamp is easily installed with no disturbance to the measured conductor.

  • Energy harvesting – powered from the measured cable
  • Pluggable - for ease of installation
  • Rapid and de-skilled installation – straightforward and easy set-up with no disruption
  • No batteries to replace – no maintenance costs

Appliance fingerprinting
Appliance Fingerprinting

Calculate the operational costs of each appliance

No batteries
No Batteries

Requires no batteries or wiring

Measure current
Measure Current

Transmits electrical current value (Amperes) wirelessly

Wireless
EnOcean compliant

Wide compatibility with other EnOcean® products.

Single Channel CT Clamp V3 Technical Data
Measurement Range 1A-60A ; 2A-200A
Measurement Frequency 50Hz or 60Hz
Accuracy - whichever is greater 60A = +/- 0.1A or 2% 200A = +/- 0.1A or 2%
Reported Value Channel 1 in Amps
Repeater No
Environment IP4X
Enclosure Material Nylon 66
Sample Time Average of 5 measurements per 30 seconds
Telegram VLD
Calibration Not Required
Operating Temperature
& Humidity range
-5°C to +40°C; 85% RH
Storage Temperature
& Humidity range
-20°C to +55°C; 85% RH
Storage Temperature & Humidity Range -20°C to +55°C; 85% RH
Diameter of Measureable Conductor 60A - 10mm
200A - 24mm
Dimensions of Clamp approx 60A - 25mm x 22mm x 35mm
200A - 35mm x 45mm x 65mm
Dimensions of Case approx 80mm x 55mm x 20mm approx
EEP D2-32-00