3 Channel Current Transducer EnOcean

3 Channel Wireless CT Clamp

The Pressac Sensing Wireless 3 Channel CT Clamp is designed to measure and report the AC current flowing in 3 separate channels. Powered from any of the measured conductors, the measured current in all 3 channels is reported every 30 seconds. The Pressac Sensing Wiresless 3 Channel CT Clamp is easily installed with no disturbance to the measured conductors. The Pressac Sensing Wireless 3 Channel CT Clamp can be integrated with a wide range Of EnOcean® compliant products from over 300 manufacturers.

  • Energy harvesting – powered from the measured cable
  • Wireless communications - low installation costs, no networking required
  • Rapid and de-skilled installation – straightforward and easy set-up with no disruption
  • No batteries to replace – no maintenance costs

Appliance fingerprinting
Appliance Fingerprinting

Calculate the operational costs of each appliance

No batteries
No Batteries

Requires no batteries or wiring

Measure current
Measure Current

Transmits electrical current value (Amperes) wirelessly

Wireless
EnOcean compliant

Wide compatibility with other EnOcean® products.

3 Channel Wireless CT Clamp Technical Data
Measurement Range 1A - 60A ; 2A - 200A ; 2A - 600A
Measurement Frequency 50 or 60Hz
Accuracy +/- 1% FSD
Transmission Rate 30 Seconds
Reported Value 3 Separate channels in Amps
Repeater No
Environment Indoor
Enclosure Material Nylon 66
Sample Time Instantaneous
Telegram VLD
Calibration Not Required
Operating Temperature & Humidity Range -5°C to +40°C; 85% RH
Storage Temperature & Humidity Range -20°C to +55°C; 85% RH
Dimensions of Measurable Conductor 60A - 10mm
200A - 24mm
600A - 36mm
Dimensions of Clamp (approx) 60A - 25mm x 22mm x 35mm
200A - 35mm x 45mm x 65mm
600A - 65mm x 41mm x 85mm
Dimensions of Case (approx) 42mm x 62mm x 16mm
EEP D2-32-02